Highlights
Best Reid interval to date – 661 metres of 0.29% nickel including 100 metres of 0.42% nickel and 40 metres of 0.51% nickel in REI-24-35 All 8 holes targeting Reid Central Core intersected core lengths greater than 620 metres with average grades of 0.21% to 0.29% nickel
Canada Nickel Company Inc. (‘ Canada Nickel ‘ or the ‘ Company ‘) (TSXV: CNC) (OTCQX: CNIKF) is pleased to announce positive assay results from its ongoing 2024 exploration program at its Reid property, located 37 kilometres northwest of Timmins, Ontario .
All 34 holes drilled this year at Reid have intersected long intervals of targeted mineralized dunite and minor peridotite. Complete assay results for 18 holes have been received, 13 of which are announced today with assay results for the remaining holes pending. Assay results for five holes were previously released on March 18 and May 6, 2024 .
Mark Selby , CEO of Canada Nickel said, ‘Reid continues to deliver excellent results, including the best individual hole to date with long core lengths grading in excess of 0.4% and 0.5% nickel and all holes delivering large intervals of target mineralization. With a target geophysical footprint larger than our flagship Crawford project and a width in the central core more than double Crawford, we look forward to the initial resource estimate for Reid expected to be released in the fourth quarter of 2024.’
Mr. Selby continued, ‘The ongoing success of our regional exploration program clearly demonstrates the potential scale of the Timmins Nickel District. We now have seven drill rigs drilling five separate targets – Reaume, Reid, Mann Central, Mann Northwest-SE, and Mann Northwest-NE – which are in addition to the two properties where we have already published a resource. Few companies have more than one project resource and we remain on-track and expect to deliver seven additional resources by this time next year.’
Reid Property
The Reid Property is located just 16 km southwest of Crawford and contains a geophysical target of 3.9 km 2 , which is nearly 2.4 times larger than Crawford (see Figure 1). The Company expects to complete the first phase of drilling later in August and to produce an initial resource at Reid in Q4 2024. The remaining drillhole assays will be released once they have been received.
Hole REI24-35 was collared near the very center of the ultramafic body and drilled south. The full interval of 661.5 metres, beginning at 40.5 metres downhole, assayed 0.29% nickel including 100.5 metres of 0.42% nickel, and 40.5 metres of 0.51% nickel, ending the hole in strong mineralization. In this area the ultramafic sequence opens to the north and is more than 900 metres wide, roughly twice the width of Crawford’s Main Zone. Hole REI24-27 was collared near the west border of the ultramafic body and drilled north. The full interval of 674.8 metres, beginning at 27.2 metres downhole, assayed 0.27% nickel including 34.5 metres of 0.30% nickel. In this area the ultramafic sequence is more than 800 metres thick, nearly twice that of Crawford’s main zone. Holes REI24-27, REI24-28, REI24-29, REI24-30, REI24-31, REI24-32, REI24-35, REI24-37, REI24-38 were drilled to continue to infill the Central Core area of the deposit with an approximate width of 900 metres and strike length of 1.7 kilometres.
The drilling campaign has identified a NNW-SSE trending corridor of dykes running through the center of the deposit which is approximately 150 metres wide, less than 7% of the overall strike length of 2.2 kilometres in the central core. Holes REI24-23, REI24-24, REI24-25, REI24-26 were drilled to identify the extent of mineralization within the local dunite, and better define the structural controls and extent of the dykes.
Table 1 – Reid drilling downhole composite.
Hole ID
From (m)
To (m)
Length (m)*
Ni %
Co %
Pd g/t
Pt g/t
Cr %
Fe %
S %
Central Core
REI24-27
27.2
702.0
674.8
0.27
0.012
0.013
0.008
0.67
5.62
0.076
including
60.0
94.5
34.5
0.30
0.013
0.024
0.007
0.66
5.76
0.110
REI24-28
18.6
705.0
686.4
0.26
0.012
0.010
0.006
0.84
5.90
0.023
including
235.5
250.5
15.0
0.30
0.012
0.006
0.008
0.87
5.46
0.025
REI24-29
54.0
568.6
514.6
0.23
0.010
0.011
0.008
0.63
6.59
0.028
and
642.6
696.0
53.4
0.24
0.014
0.017
0.011
0.85
7.46
0.026
REI24-30
30.0
702.0
672.0
0.24
0.013
0.014
0.010
0.70
6.79
0.060
including
633.0
640.5
7.5
0.42
0.018
0.080
0.040
0.63
8.13
0.288
and
664.5
673.5
9.0
0.37
0.019
0.071
0.046
0.51
8.75
0.275
REI24-31
28.0
648.4
620.4
0.22
0.013
0.013
0.009
0.61
6.85
0.072
including
31.5
340.5
309.0
0.27
0.012
0.010
0.006
0.71
6.11
0.074
including
39.0
52.0
13.0
0.41
0.014
0.026
0.014
0.69
5.68
0.075
and
279.0
306.0
27.0
0.29
0.014
0.016
0.005
0.68
7.61
0.131
REI24-32
21.0
696.0
675.0
0.21
0.012
0.008
0.007
0.71
6.43
0.034
including
166.5
421.5
255.0
0.25
0.011
0.005
0.004
0.89
5.57
0.038
REI24-35
40.5
702.0
661.5
0.29
0.012
0.018
0.013
0.69
5.67
0.052
including
340.5
361.5
21.5
0.34
0.013
0.221
0.094
0.66
5.85
0.074
and
601.5
702.0
100.5
0.42
0.015
0.035
0.019
0.59
6.26
0.123
including
645.0
685.5
40.5
0.51
0.015
0.040
0.023
0.59
6.21
0.149
REI24-37
42.2
697.5
655.3
0.24
0.013
0.012
0.009
0.57
6.28
0.032
including
42.2
312.0
269.8
0.27
0.013
0.023
0.018
0.60
6.19
0.029
including
202.5
219.0
16.5
0.41
0.015
0.241
0.146
0.49
7.16
0.093
REI24-38
27.0
702.0
675.0
0.22
0.012
0.024
0.018
0.63
6.55
0.045
including
238.0
550.5
312.5
0.26
0.012
0.048
0.035
0.69
6.04
0.056
including
301.5
327.0
25.5
0.32
0.012
0.009
0.006
0.78
5.97
0.078
and
510.0
540
30
0.33
0.012
0.174
0.229
0.74
6.16
0.103
Central Dyke Corridor
REI24-23
24.0
303.0
279.0
0.18
0.014
0.010
0.012
0.53
7.82
0.016
and
343.8
564.0
220.2
0.25
0.013
0.010
0.006
0.77
7.47
0.038
REI24-24
78.9
94.9
16.0
0.27
0.012
0.067
0.024
0.68
5.89
0.098
and
174.1
247.2
73.1
0.25
0.012
0.006
0.005
0.83
5.61
0.036
and
260.0
627.0
367.0
0.24
0.011
0.004
0.007
0.85
5.79
0.063
and
674.0
705.0
31.0
0.19
0.012
0.003
0.006
0.55
7.32
0.028
REI24-25
28.0
312.0
284.0
0.18
0.013
0.009
0.011
0.58
7.64
0.035
and
322.7
717.0
394.3
0.23
0.012
0.008
0.007
0.78
6.13
0.034
REI24-26
30.6
106.5
75.9
0.27
0.011
0.016
0.013
0.77
5.47
0.034
and
122.9
280.0
157.1
0.20
0.013
0.050
0.018
0.56
7.65
0.033
and
321.4
488.5
167.1
0.20
0.014
0.024
0.016
0.50
8.25
0.032
*True width undetermined. All lengths are drillhole lengths.
Table 2: Drillhole Orientation
Hole ID
Easting (mE)
Northing (mN)
Azimuth (⁰)
Dip (⁰)
Length (m)
REI24-23
456758
5404333
135
-55
564
REI24-24
457157
5404317
0
-60
705
REI24-25
457345
5404725
180
-60
717
REI24-26
457350
5404200
258
-50
528
REI24-27
456165
5403790
0
-60
702
REI24-28
456960
5404500
180
-70
705
REI24-29
457555
5403900
0
-55
696
REI24-30
457350
5404450
180
-60
702
REI24-31
456365
5404000
0
-60
648
REI24-32
456960
5404500
315
-60
705
REI24-35
456960
5404100
180
-60
702
REI24-37
457765
5404100
180
-60
697
REI24-38
456365
5403800
180
-60
702
Statement Regarding TSX Venture
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Quality Assurance and Control, Drilling and Assaying
Edwin Escarraga , MSc, P.Geo., a ‘qualified person’ as defined by National Instrument 43-101, is responsible for the on-going drilling and sampling program, including quality assurance (QA) and quality control (QC). The core is collected from the drill in sealed core trays and transported to the core logging facility. The core is marked and sampled at 1.5 metre lengths and cut with a diamond blade saw. One set of samples is transported in secured bags directly from the Canada Nickel core shack to Actlabs Timmins, while a second set of samples is securely shipped to SGS Lakefield for preparation, with analysis performed at SGS Burnaby or SGS Callao ( Peru ). All are ISO/IEC 17025 accredited labs. Analysis for precious metals (gold, platinum and palladium) are completed by Fire Assay while analysis for nickel, cobalt, sulphur and other elements are performed using a peroxide fusion and ICP-OES analysis. Certified standards and blanks are inserted at a rate of 3 QA/QC samples per 20 core samples making a batch of 60 samples that are submitted for analysis.
Qualified Person and Data Verification
Stephen J. Balch P.Geo . (ON), VP Exploration of Canada Nickel and a ‘qualified person’ as such term is defined by National Instrument 43-101, has verified the data disclosed in this news release, and has otherwise reviewed and approved the technical information in this news release on behalf of Canada Nickel Company Inc.
About Canada Nickel Company
Canada Nickel Company Inc. is advancing the next generation of nickel-sulphide projects to deliver nickel required to feed the high growth electric vehicle and stainless steel markets. Canada Nickel Company has applied in multiple jurisdictions to trademark the terms NetZero Nickel TM , NetZero Cobalt TM , NetZero Iron TM and is pursuing the development of processes to allow the production of net zero carbon nickel, cobalt, and iron products. Canada Nickel provides investors with leverage to nickel in low political risk jurisdictions. Canada Nickel is currently anchored by its 100% owned flagship Crawford Nickel-Cobalt Sulphide Project in the heart of the prolific Timmins-Cochrane mining camp. For more information, please visit www.canadanickel.com.
For further information, please contact:
Mark Selby
CEO
Phone: 647-256-1954
Email: info@canadanickel.com
Cautionary Statement Concerning Forward-Looking Statements
This press release contains certain information that may constitute ‘forward-looking information’ under applicable Canadian securities legislation. Forward looking information includes, but is not limited to, drill and exploration results relating to the target properties described herein (the ‘Properties’), the significance of drill results, the ability to continue drilling, the impact of drilling on the definition of any resource, the potential of the Crawford Nickel Sulphide Project and the Properties, timing and completion (if at all) of mineral resource estimates, the ability to sell marketable materials, strategic plans, including future exploration and development plans and results, and corporate and technical objectives. Forward-looking information is necessarily based upon several assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking information. Factors that could affect the outcome include, among others: future prices and the supply of metals, the future demand for metals, the results of drilling, inability to raise the money necessary to incur the expenditures required to retain and advance the property, environmental liabilities (known and unknown), general business, economic, competitive, political and social uncertainties, results of exploration programs, risks of the mining industry, delays in obtaining governmental approvals, failure to obtain regulatory or shareholder approvals, and the impact of COVID-19 related disruptions in relation to the Company’s business operations including upon its employees, suppliers, facilities and other stakeholders. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information. All forward-looking information contained in this press release is given as of the date hereof and is based upon the opinions and estimates of management and information available to management as at the date hereof. Canada Nickel disclaims any intention or obligation to update or revise any forward-looking information, whether because of new information, future events or otherwise, except as required by law.
View original content to download multimedia: https://www.prnewswire.com/news-releases/canada-nickel-achieves-best-drill-results-to-date-at-reid-302217819.html
SOURCE Canada Nickel Company Inc.
News Provided by PR Newswire via QuoteMedia